Used for attaching heavy loads to concrete, brick, and hollow block.
Can be removed for adjustment, then re-driven into same hole.
The Concrete Bolt is designed to match standard fixture clearance holes that are 1/16" over anchor diameter to provide a secure fit.
Hex size is 1-1/8".
The washer diameter is 1-13/32".
Thread length is 3-3/4".
Minimum Embedment is 3-3/4".
Can be installed at shallower embedment depths than wedge or sleeve anchors reducing the chance of striking reinforcing bars or embedded cables.
Utilizes a specially designed relief thread formed in the body of the anchor which allows easy tightening at a reduced torque level and provides dust relief to prevent anchor from jamming.
A chamfered end easily centers anchor, and a 30°; helix angle allows anchor to be tightened quickly.
The controlled "screw-in" method is safer than using a hammer.
Diameter and length appear on the head of each anchor.
Mechanically galvanized to meet ASTM Specification B695 Manufactured from AISI 1038 heat-treated steel.
