Products

10

Sold Out Free

Used to "tap" their own mating internal thread when driven into preformed holes in metallic materials. Does not require a preformed hole in wood. Case...

100

Sold Out $15.69

Designed as an intermediate support for drop wire runs on wood or masonry. Works as a stand off in areas where damage to wire from...

1000

Sold Out Free

Used to "tap" their own mating internal thread when driven into preformed holes in metallic materials. Does not require a preformed hole in wood. Case...

10002

Sold Out $1.97

Designed for use in square holes to keep the bolt from turning as the nut is tightened. Once bolt is inserted in square hole, bolt...

10005

Sold Out $1.01

Designed for use in square holes to keep the bolt from turning as the nut is tightened. Once bolt is inserted in square hole, bolt...

10006

Sold Out $94.04

Designed for use in square holes to keep the bolt from turning as the nut is tightened. Once bolt is inserted in square hole, bolt...

10011T

Sold Out Free

10013

Sold Out $0.40

Stainless bolts conform to ASTM F593. Bolts conform to the dimensions of ASME B18.2.1.Minimum tensile strength: 14,190 lbf. Recommended torque value: 79.7 ft lb.Thread length...

100133

Sold Out Free

10013T

Sold Out $0.48

Stainless bolts conform to ASTM F593. Bolts conform to the dimensions of ASME B18.2.1.Minimum tensile strength: 14,190 lbf. Recommended torque value: 79.7 ft lb.

10014

Sold Out Free

Stainless bolts conform to ASTM F593. Bolts conform to the dimensions of ASME B18.2.1.Minimum tensile strength: 1/4" - 3,180 lbf. Recommended torque value: 1/4" -...

10014T

Sold Out $0.69

Stainless bolts conform to ASTM F593. Bolts conform to the dimensions of ASME B18.2.1.Minimum tensile strength: 1/4" – 3,180 lbf. Recommended torque value: 1/4" –...

10015

Sold Out Free

Stainless bolts conform to ASTM F593. Bolts conform to the dimensions of ASME B18.2.1.Minimum tensile strength: 1/4" - 3,180 lbf. Recommended torque value: 1/4" -...

10015T

Sold Out $0.62

Stainless bolts conform to ASTM F593. Bolts conform to the dimensions of ASME B18.2.1.Minimum tensile strength: 1/4" – 3,180 lbf. Recommended torque value: 1/4" –...

10016

Sold Out $0.63

Stainless bolts conform to ASTM F593. Bolts conform to the dimensions of ASME B18.2.1.Minimum tensile strength: 1/4" - 3,180 lbf. Recommended torque value: 1/4" -...

10017

Sold Out Free

Stainless bolts conform to ASTM F593. Bolts conform to the dimensions of ASME B18.2.1.Minimum tensile strength: 1/4" - 3,180 lbf. Recommended torque value: 1/4" -...

10017T

Sold Out Free

10018

Sold Out $1.18

Stainless bolts conform to ASTM F593. Bolts conform to the dimensions of ASME B18.2.1.Minimum tensile strength: 1/4" - 3,180 lbf. Recommended torque value: 1/4" -...

10019

Sold Out Free

Stainless bolts conform to ASTM F593. Bolts conform to the dimensions of ASME B18.2.1.Minimum tensile strength: 1/4" - 3,180 lbf. Recommended torque value: 1/4" -...

1002

Sold Out $3.75

Accepts both Phillip and Slotted drives. Used to "tap" their own mating internal thread when driven into preformed holes in metallic materials. Does not require...

10021

Sold Out Free

Accepts both Phillip and Slotted drives. Used to "tap" their own mating internal thread when driven into preformed holes in metallic materials. Does not require...

10025

Sold Out Free

Accepts both Phillip and Slotted drives. Used to "tap" their own mating internal thread when driven into preformed holes in metallic materials. Does not require...

10026

Sold Out Free

Accepts both Phillip and Slotted drives. Used to "tap" their own mating internal thread when driven into preformed holes in metallic materials. Does not require...

1003

Sold Out $1.27

Used to secure a tap or other electronic device to strand. Consists of an Aluminum bracket, a set of Aluminum mating jaws, and a hot...

10032

Sold Out Free

Accepts both Phillip and Slotted drives. Used to "tap" their own mating internal thread when driven into preformed holes in metallic materials. Does not require...

10035

Sold Out $0.43

Used for fastening poleline hardware to crossarms, poles, and other structures. Bolt head marking (ABI) appears on head of each bolt, and is registered with...

10036

Sold Out $1.06

Used for fastening poleline hardware to crossarms, poles, and other structures. Bolt head marking (ABI) appears on head of each bolt, and is registered with...

100365

Sold Out $0.74

Used for fastening poleline hardware to crossarms, poles, and other structures. Bolt head marking (ABI) appears on head of each bolt, and is registered with...

10037

Sold Out $1.10

Used for fastening poleline hardware to crossarms, poles, and other structures. Bolt head marking (ABI) appears on head of each bolt, and is registered with...

10038

Sold Out $0.65

Used for fastening poleline hardware to crossarms, poles, and other structures. Bolt head marking (ABI) appears on head of each bolt, and is registered with...

10048

Sold Out $3.61

Used for fastening poleline hardware to crossarms, poles, and other structures. Has a formed "cone point" to ease attachment of nut. Allied Bolt marking (ABI)...

10048SS

Sold Out Free

Used to secure cable suspension clamps and other poleline brackets and clamps. Each square head bolt is supplied with one attached regULar square nuts. Bolt...

10052

Sold Out $1.79

Used to accept drop wire clamps at the corners of buildings. Comprised of a steel bracket, retaining washer, carriage bolt, hex nut, and lock washer....

10057

Sold Out $1.11

Used in combination with a porcelain knob for accepting a telephone drop or as a standoff bracket. (3) 5/16" diameter mounting holes accommodate 1/4" Lag...

1006

Sold Out $0.83

Used for mounting devices in pedestals or enclosures. Stamped from pre-galvanized steel.

10069

Sold Out $0.59

Provides an inexpensive means for grounding telephone and CATV systems to an I-beam. Teeth on bracket help penetrate paint and rust to ensure a strong...

10075

Sold Out $2.14

Used to support all sizes of Figure 8 cable. The clip grips the messenger wire over the insULation, without damage to the insULation. Accommodates 5/16"...

10076

Sold Out $2.18

Service Wedge Clamps are used for low-tension dead-ending of ACSR, AAAC, and Aluminum Conductors. Wedge Clamps shells have a pre-adhered grit to strengthen hold on...

10076FL

Sold Out Free

Service Wedge Clamps are used for low-tension dead-ending of ACSR, AAAC, and Aluminum Conductors. Wedge Clamps shells have a pre-adhered grit to strengthen hold on...

10076NI

Sold Out $1.67

Service Wedge Clamps are used for low-tension dead-ending of ACSR, AAAC, and Aluminum Conductors. Wedge Clamps shells have a pre-adhered grit to strengthen hold on...

10076NI-FL

Sold Out $1.81

Service Wedge Clamps are used for low-tension dead-ending of ACSR, AAAC, and Aluminum Conductors. Wedge Clamps shells have a pre-adhered grit to strengthen hold on...

10077

Sold Out $3.05

Service Wedge Clamps are used for low-tension dead-ending of ACSR, AAAC, and Aluminum Conductors. Wedge Clamps shells have a pre-adhered grit to strengthen hold on...

10077FL

Sold Out Free

Service Wedge Clamps are used for low-tension dead-ending of ACSR, AAAC, and Aluminum Conductors. Wedge Clamps shells have a pre-adhered grit to strengthen hold on...

10077NI

Sold Out $2.82

Service Wedge Clamps are used for low-tension dead-ending of ACSR, AAAC, and Aluminum Conductors. Wedge Clamps shells have a pre-adhered grit to strengthen hold on...

10077NI-FL

Sold Out $2.90

Service Wedge Clamps are used for low-tension dead-ending of ACSR, AAAC, and Aluminum Conductors. Wedge Clamps shells have a pre-adhered grit to strengthen hold on...

10078

Sold Out $3.77

Service Wedge Clamps are used for low-tension dead-ending of ACSR, AAAC, and Aluminum Conductors. Wedge Clamps shells have a pre-adhered grit to strengthen hold on...

10078FL

Sold Out Free

Service Wedge Clamps are used for low-tension dead-ending of ACSR, AAAC, and Aluminum Conductors. Wedge Clamps shells have a pre-adhered grit to strengthen hold on...

10078NI

Sold Out $3.11

Service Wedge Clamps are used for low-tension dead-ending of ACSR, AAAC, and Aluminum Conductors. Wedge Clamps shells have a pre-adhered grit to strengthen hold on...