Products

1925

Sold Out $11.43

Used for attaching coaxial cable to wood or masonry. Each clip is stamped from AISI 1018 Steel. Screws are formed from AISI 1018 Hardened Steel....

19250

Sold Out $7.36

Commonly used in structural steel joints in heavy construction. Heat treated to have a RockWell Hardness ranging between C24-35. Yield strength is 92,000 psi minimum....

19251

Sold Out $7.52

Commonly used in structural steel joints in heavy construction. Heat treated to have a RockWell Hardness ranging between C24-35. Yield strength is 92,000 psi minimum....

194

Sold Out $9.06

Used with bolts for making medium weight attachments (under 300 lbs.) such as wall straps, clamps, and brackets to concrete, block, brick, and stone. Made...

1941

Sold Out Free

Used for attaching coaxial cable to wood or masonry. Each clip is stamped from AISI 1018 Steel. A polypropylene bushing is provided to assure that...

1949

Sold Out $9.52

Used to secure coaxial cable to wood, plaster, mortar and concrete block. The Screws are #8 X 1" Slotted Hex Washer Tapping Screws. They are...

195

Sold Out $26.59

Used with bolts for making medium weight attachments (under 300 lbs.) such as wall straps, clamps, and brackets to concrete, block, brick, and stone. Made...

1950

Sold Out $9.66

Used to secure coaxial cable to wood, plaster, mortar and concrete block. The Screws are #8 X 1" Slotted Hex Washer Tapping Screws. They are...

197

Sold Out $1.17

Countersunk head allows fastener to lie flush with surface. Does not require a preformed hole in wood. For use in soft wood. Manufactured from AISI...

198

Sold Out $2.84

Used to "tap" their own mating internal thread when driven into preformed holes in metallic materials. Does not require a preformed hole in wood. Case...

19800

Sold Out Free

Used to "tap" their own mating internal thread when driven into preformed holes in metallic materials. All sizes are fULly threaded. Does not require a...

199

Sold Out $15.38

Used to "tap" their own mating internal thread when driven into preformed holes in metallic materials. Does not require a preformed hole in wood. Case...

1999

Sold Out $0.73

Used to secure messengered drop wire to drive hooks, span clamps, and various house attachments. Offset curvature on clamp relieves strain on Support Wire. Cup...

19995

Sold Out Free

Kits contain one 304 Stainless Steel Hex Cap Screw, two 304 Stainless Steel Flat Washers, one 304 Stainless Steel Split Lock Washer, and one Silicon...

19996

Sold Out $2.59

Kits contain one 304 Stainless Steel Hex Cap Screw, two 304 Stainless Steel Flat Washers, one 304 Stainless Steel Split Lock Washer, and one Silicon...

19997

Sold Out Free

Kits contain one 304 Stainless Steel Hex Cap Screw, two 304 Stainless Steel Flat Washers, one 304 Stainless Steel Split Lock Washer, and one Silicon...

19998

Sold Out Free

Kits contain one 304 Stainless Steel Hex Cap Screw, two 304 Stainless Steel Flat Washers, one 304 Stainless Steel Split Lock Washer, and one Silicon...

2

Sold Out Free

Used to "tap" their own mating internal thread when driven into preformed holes in metallic materials. Does not require a preformed hole in wood. Case...

20

Sold Out Free

200

Sold Out Free

Used to "tap" their own mating internal thread when driven into preformed holes in metallic materials. Does not require a preformed hole in wood. Case...

2001

Sold Out $0.39

Used to support drop wire clamps, deadend clamps, and service drops on utility poles and buildings. Manufactured with curved upward “fetter” type thread that can...

2002

Sold Out $3.27

Used to secure the integrated messengered wires of Figure 8 Self Supporting Cables to various house attachments, drive hooks, and span clamps. Clamp grips the...

2003

Sold Out $8.00

Used to attach Pole Line Hardware to telephone poles and other wood structures. Hex head is 9/16" across flats. Formed from Grade 2 Steel. Lag...

201

Sold Out $1.39

Used to "tap" their own mating internal thread when driven into preformed holes in metallic materials. Does not require a preformed hole in wood. Case...

2010

Sold Out $2.50

Used to "tap" their own mating internal thread when driven into preformed holes in metallic materials. Does not require a preformed hole in wood. Case...

202

Sold Out $1.51

Used to "tap" their own mating internal thread when driven into preformed holes in metallic materials. Does not require a preformed hole in wood. Case...

203

Sold Out $1.10

Used for making lightweight attachments (under 40 lbs.) such as terminals and back-plates of wall phones to drywall. No pre-drilling is required. The screw size...

20300

Sold Out $9.82

Used for making lightweight attachments (under 40 lbs.) such as terminals and back-plates of wall phones to drywall. No pre-drilling is required. The screw size...

2050

Sold Out $3.65

Used with machine bolts or eyebolts for straightaway messenger dead-ending or guying. Forged from high strength AISI 1018 Steel. Rated to support a 30,000 lb.load....

2051

Sold Out $3.78

Used with machine bolts or eyebolts for straightaway messenger dead-ending or guying. Forged from high strength AISI 1018 Steel. Rated to support a 30,000 lb.load....

2054

Sold Out $3.83

Used with machine bolts for dead-ending. Forged from high strength AISI 1018 Steel. Rated to support a 32,000 lb.load. Slot size is 11/16" x 1-1/8"....

2055

Sold Out $3.65

Used with machine bolts for dead-ending. Forged from high strength AISI 1018 Steel. Rated to support a 32,000 lb.load. Slot size is 13/16" x 1-1/8"....

2060

Sold Out $3.53

Used with machine bolts or eyebolts for down guying. Forged from high strength AISI 1018 Steel. Hot dip galvanized to meet ASTM Specification A153. ULtimate...

2061

Sold Out $3.51

Used with machine bolts or eyebolts for down guying. Forged from high strength AISI 1018 Steel. Hot dip galvanized to meet ASTM Specification A153. ULtimate...

20679

Sold Out Free

Manufactured from AISI 1005 Steel. RockWell Hardness ranges from B70-100. Zinc plated to meet ASTM Specification F1941. Screws conform to the dimensions of ASME B18.6.3...

20685

Sold Out Free

Manufactured from AISI 1005 Steel. RockWell Hardness ranges from B70-100. Zinc plated to meet ASTM Specification F1941. Screws conform to the dimensions of ASME B18.6.3...

2070

Sold Out $10.59

Used for placement of second cable at the same level and side of a pole as the existing cable. Cable Extension Bolts are designed to...

2071

Sold Out $14.18

Used for placement of second cable at the same level and side of a pole as the existing cable. Cable Extension Bolts are designed to...

2072

Sold Out Free

Used for placement of hook at the same level and side of a pole as the existing cable. Cable Extension Bolt with Hook are designed...

2073

Sold Out $18.22

Used for placement of second cable at the same level and side of a pole as the existing cable. Cable Extension Bolts are designed to...

2090

Sold Out $56.69

Used in aerial construction as a connector between two utility poles where one pole is intended as a brace (support) for the other pole. Consists...

2098

Sold Out $0.42

Used for securing Figure 8 Coaxial Drop Cable to drive hooks, span clamps, and various house attachments. Offset curvature on clamp relieves strain on Support...

21

Sold Out Free

Countersunk head allows fastener to lie flush with mating surface. Used to "tap" their own mating internal thread when driven into preformed holes in metallic...

2100

Sold Out $1.04

Used to secure messengered drop wire to drive hooks, span clamps, and various house attachments. Offset curvature on clamp relieves strain on Support Wire. Cup...

2101

Sold Out $15.11

Used as a grounding electrode for buildings and poles. Manufactured from AISI 1035 Steel. Size of rod, manufacturers mark, and appropriate testing requirement is stamped...

2102

Sold Out $20.19

Used as a grounding electrode for buildings and poles. Manufactured from AISI 1035 Steel. Size of rod, manufacturers mark, and appropriate testing requirement is stamped...

2105

Sold Out $15.67

Used for extending the length of an existing Guy Rod or adding an additional eye to and existing Anchor Rod. Clamp is comprised of two...

21051

Sold Out Free

Grade 2 bolts conform to ASTM A307 Grade A. All tap bolts are fULly threaded. Grade 2 bolts are zinc plated to meet ASTM Specification...