Products

4205

Sold Out $2.17

Spool insULators are used with spool bolts (upset bolts), clevises, and secondary racks for dead-ending or supporting secondary voltage conductors. Porcelain insULator manufactured to meet...

421

Sold Out Free

Countersunk head allows fastener to lie flush with mating surface. Used to "tap" their own mating internal thread when driven into preformed holes in metallic...

422

Sold Out Free

423

Sold Out Free

Accepts both Phillip and Slotted drives. Used to "tap" their own mating internal thread when driven into preformed holes in metallic materials. Does not require...

43

Sold Out Free

Countersunk head allows fastener to lie flush with surface. Does not require a preformed hole in wood. For use in soft wood. Manufactured from AISI...

432

Sold Out Free

Used in conjunction with 18-8 stainless bolts and machine screws. RockWell Hardness ranges from B95-C32. Highly weather resistant. Proof load is 100,000 psi. Nuts conform...

434

Sold Out $1.06

Used for anchoring lightweight attachments to drywall (ceilings), hollow block, wallboard and plaster. Accommodates a wide range of wall thickness. The toggle wing is a...

435

Sold Out $5.07

Used in outside plant construction for making attachments to telephone poles and other wood structures. Square head is 3/8". Formed from Grade 2 Steel. Lag...

438

Sold Out $17.90

Used for attaching pole line hardware to wood telephone poles. Manufactured with flat heads and diamond points. Formed from AISI 1018 Steel. Hot dip galvanized...

44

Sold Out Free

Countersunk head allows fastener to lie flush with surface. Does not require a preformed hole in wood. For use in soft wood. Manufactured from AISI...

440

Sold Out Free

44050

Sold Out $3.53

Designed for use in in extreme cold weather applications. ‘CA’ designation marked on head of bolts for identification. Bolts are complaint with CSA Specification 83.66.96....

442

Sold Out $5.34

Used with porcelain knobs for accepting the bail of drop wire clamps. Gimlet point penetrates easily into wall, while the machine screw thread at opposite...

443

Sold Out $51.43

Provides all the necessary tools to install B Steel Anchors (Concrete Screws). Each kit includes a 1/4" and 5/16" magnetic driver, sleeve, masonry bit adapter,...

444

Sold Out $3.85

B Beam Clamp is used for dead-ending strand runs to “I” beaMs.The clamp is provided with an attachment hole for 5/8” bolts and a clamping...

44411

Sold Out Free

Manufactured from Type #304 Stainless Steel. Thread length is 1".

44412

Sold Out Free

Manufactured from Type #304 Stainless Steel. Thread length is 1".

44414

Sold Out Free

Manufactured from Type #304 Stainless Steel. Thread length is 1".

44419

Sold Out Free

Manufactured from Type #304 Stainless Steel. Thread length is 1-1/4".

44430

Sold Out Free

Manufactured from Type #304 Stainless Steel. FULly threaded.

445

Sold Out $0.67

Used for anchoring lightweight attachments to drywall (ceilings), hollow block, wallboard and plaster. Accommodates a wide range of wall thickness. The toggle wing is a...

446

Sold Out $0.67

Used for anchoring lightweight attachments to drywall (ceilings), hollow block, wallboard and plaster. Accommodates a wide range of wall thickness. The toggle wing is a...

447

Sold Out $7.89

Used for anchoring lightweight attachments to drywall (ceilings), hollow block, wallboard and plaster. Accommodates a wide range of wall thickness. The toggle wing is a...

448

Sold Out $7.89

Used for anchoring lightweight attachments to drywall (ceilings), hollow block, wallboard and plaster. Accommodates a wide range of wall thickness. The toggle wing is a...

45

Sold Out Free

Countersunk head allows fastener to lie flush with surface. Does not require a preformed hole in wood. For use in soft wood. Manufactured from AISI...

45000

Sold Out Free

Designed for use in in extreme cold weather applications. ‘CA’ designation marked on head of bolts for identification. Bolts are complaint with CSA Specification 83.66.96....

45001

Sold Out $0.66

Designed for use in in extreme cold weather applications. Charpy Level 1 Impact - Average minimum energy absorption of 20J when tested at -20°; Celsius...

45002

Sold Out $0.79

Designed for use in in extreme cold weather applications. Charpy Level 1 Impact - Average minimum energy absorption of 20J when tested at -20°; Celsius...

45003

Sold Out $0.92

Designed for use in in extreme cold weather applications. Charpy Level 1 Impact - Average minimum energy absorption of 20J when tested at -20°; Celsius...

45004

Sold Out $1.05

Designed for use in in extreme cold weather applications. Charpy Level 1 Impact - Average minimum energy absorption of 20J when tested at -20°; Celsius...

45005

Sold Out $1.12

Designed for use in in extreme cold weather applications. Charpy Level 1 Impact - Average minimum energy absorption of 20J when tested at -20°; Celsius...

45006

Sold Out $1.25

Designed for use in in extreme cold weather applications. Charpy Level 1 Impact - Average minimum energy absorption of 20J when tested at -20°; Celsius...

45007

Sold Out $1.45

Designed for use in in extreme cold weather applications. Charpy Level 1 Impact - Average minimum energy absorption of 20J when tested at -20°; Celsius...

45008

Sold Out $1.57

Designed for use in in extreme cold weather applications. Charpy Level 1 Impact - Average minimum energy absorption of 20J when tested at -20°; Celsius...

45009

Sold Out $1.89

Designed for use in in extreme cold weather applications. Charpy Level 1 Impact - Average minimum energy absorption of 20J when tested at -20°; Celsius...

45010

Sold Out $2.50

Designed for use in in extreme cold weather applications. Charpy Level 1 Impact - Average minimum energy absorption of 20J when tested at -20°; Celsius...

45011

Sold Out $2.87

Designed for use in in extreme cold weather applications. Charpy Level 1 Impact - Average minimum energy absorption of 20J when tested at -20°; Celsius...

45012

Sold Out $1.29

Designed for use in in extreme cold weather applications. Charpy Level 1 Impact - Average minimum energy absorption of 20J when tested at -20°; Celsius...

45013

Sold Out $1.57

Designed for use in in extreme cold weather applications. Charpy Level 1 Impact - Average minimum energy absorption of 20J when tested at -20°; Celsius...

45014

Sold Out $1.58

Designed for use in in extreme cold weather applications. Charpy Level 1 Impact - Average minimum energy absorption of 20J when tested at -20°; Celsius...

45015

Sold Out $1.84

Designed for use in in extreme cold weather applications. Charpy Level 1 Impact - Average minimum energy absorption of 20J when tested at -20°; Celsius...

45016

Sold Out $1.90

Designed for use in in extreme cold weather applications. Charpy Level 1 Impact - Average minimum energy absorption of 20J when tested at -20°; Celsius...

45017

Sold Out $1.71

Designed for use in in extreme cold weather applications. Charpy Level 1 Impact - Average minimum energy absorption of 20J when tested at -20°; Celsius...

45018

Sold Out $1.98

Designed for use in in extreme cold weather applications. Charpy Level 1 Impact - Average minimum energy absorption of 20J when tested at -20°; Celsius...

45019

Sold Out $2.26

Designed for use in in extreme cold weather applications. Charpy Level 1 Impact - Average minimum energy absorption of 20J when tested at -20°; Celsius...

4502

Sold Out Free

45020

Sold Out $2.51

Designed for use in in extreme cold weather applications. Charpy Level 1 Impact - Average minimum energy absorption of 20J when tested at -20°; Celsius...

45021

Sold Out $2.79

Designed for use in in extreme cold weather applications. Charpy Level 1 Impact - Average minimum energy absorption of 20J when tested at -20°; Celsius...