For Reference Only

Contact your MacLean Broadband Solutions CSR for Current Information macleannetworksolutions.com

Hide
Menu 0

Browse by tag:

Products

Home   Products   Page 38 of 78
 

5055

Sold Out

Used to form guy loops that attach to anchor rods. Parallel grooves accept strand without marring. Plate halves align evenly for ease of installation. Plate...

View full product details
 

5056

Sold Out

Used to form guy loops that attach to anchor rods. Parallel grooves accept strand without marring. Plate halves align evenly for ease of installation. Plate...

View full product details
 

5057

Sold Out

Attaches to one side of the guard arm for additional support at points on the pole where cable or drop wire is suspended. A 7/16"...

View full product details
 

5058

Sold Out

Used to form guy loops that attach to anchor rods. Parallel grooves accept strand without marring. Plate halves align evenly for ease of installation. Plate...

View full product details

 

5059

Sold Out

Used to form guy loops that attach to anchor rods. Parallel grooves accept strand without marring. Plate halves align evenly for ease of installation. Plate...

View full product details
 

506

Sold Out

Used for anchoring lightweight attachments to drywall (ceilings), hollow block, wallboard and plaster. Accommodates a wide range of wall thickness. The toggle wing is a...

View full product details
 

5060

Sold Out

Used as a means of attaching guy wire to poles. Not intended for back-to-back guying. Fastened to utility poles with a 5/8" Machine Bolt. Casted...

View full product details
 

5061

Sold Out

Used as a means of attaching guy wire to poles. Not intended for back-to-back guying. Fastened to utility poles with a 3/4" Machine Bolt. Casted...

View full product details

 

5062

Sold Out

Used as a means of attaching guy wire to poles. Not intended for back-to-back guying. Fastened to utility poles with a 1" Machine Bolt. Casted...

View full product details
 

5063

Sold Out

Used for attaching to Service Masts and accepting the bail of Wedge Clamps. Fits on Masts ranging from 1-1/4" to 3". Hot dip galvanized to...

View full product details
 

5065

Sold Out

Used for guying and dead ending strand on walls and buildings. Used to terminate strand at the corners of buildings. The spacing between mounting holes...

View full product details
 

5066

Sold Out

Used for guying and dead ending strand on walls and buildings. Used to terminate strand at the corners of buildings. The spacing between mounting holes...

View full product details

 

5067

Sold Out

Used for guying and dead ending strand on walls and buildings. Used to terminate strand at a right angle to the wall. The spacing between...

View full product details
 

5068

Sold Out

Used to terminate strand at the corners of buildings. Formed from AISI 1018 Steel. Hot dip galvanized to meet ASTM Specification A153.

View full product details
 

507

Sold Out

Used for anchoring lightweight attachments to drywall (ceilings), hollow block, wallboard and plaster. Accommodates a wide range of wall thickness. The toggle wing is a...

View full product details
 

5070

Sold Out

Used in pairs as a means of aligning and supporting crossarMs.Hole centers are 1" from brace ends. The diameters of the mounting holes are 7/16"...

View full product details

 

5074

Sold Out

Used to attach strand to straight line poles. Accepts 1/4" (6.6M) to 7/16" (16M) strand. Consist of two hot rolled, specially-shaped plates. Plates are 1-11/16"...

View full product details
 

508

Sold Out

Used for anchoring lightweight attachments to drywall (ceilings), hollow block, wallboard and plaster. Accommodates a wide range of wall thickness. The toggle wing is a...

View full product details
 

5080

Sold Out

Used to attach strand to straight line poles. Accepts 1/4" (6.6M) to 7/16" (16M) strand. Consists of two plates, and two 1/2"-13 track bolts with...

View full product details
 

5080SS

Sold Out

Used in high corrosive environments to attach strand to straight line poles. All components constructed from high-strength #304 stainless steel.

View full product details

 

5081

Sold Out

Used for attaching strand to corner poles. Accepts 1/4" (6.6m) to 7/16" (16m) strand. Clamp consists of two mating plates, two 5/8"-11 track bolts with...

View full product details
 

5082

Sold Out

Used to attach strand to straight line poles. Accepts 1/4" (6.6M) to 7/16" (16M) strand. Consists of one hot rolled specialty shaped plate, one stamped...

View full product details
 

5083

Sold Out

Used for attaching strand to corner poles. Accepts 1/4" (6.6m) to 7/16" (16m) strand. Clamp consists of two mating plates, two 1/2"-13 track bolts with...

View full product details
 

5084

Sold Out

Designed to accept a loop of strand, a strand grip, or a Strand Dead-end in down guy applications. Recessed bolt hole to accept head of...

View full product details

 

5085

Sold Out

Designed to accept a loop of strand, a strand grip, or a Strand Dead-end in down guy applications. Recessed bolt hole to accept head of...

View full product details
 

5086

Sold Out

A pole attachment with center hole that is mounted with a 5/8" suspension bolt to accept guy grips and Strand Dead-ends. Used for cable runs...

View full product details
 

5087

Sold Out

Used to attach strand to straight line poles. Accepts 1/4" (6.6M) to 7/16" (16M) strand. Consists of two plates,and two 1/2"-13 track bolts with attached...

View full product details
 

509

Sold Out

Used for anchoring lightweight attachments to drywall (ceilings), hollow block, wallboard and plaster. Accommodates a wide range of wall thickness. The toggle wing is a...

View full product details

 

5090

Sold Out

Used for dead-ending and at corner structures to provide clearance for mounting equipment or climbing space. Extension link provides a 24" offset and is 5/8"...

View full product details
 

5091

Sold Out

Used in pairs as a means of aligning and supporting crossarMs.Hole centers are 1" from brace ends. The diameters of the mounting holes are 7/16"...

View full product details
 

5092

Sold Out

Used in pairs as a means of aligning and supporting crossarMs.Hole centers are 1" from brace ends. The diameters of the mounting holes are 7/16"...

View full product details
 

5093

Sold Out

Used in pairs as a means of aligning and supporting crossarMs.Hole centers are 1" from brace ends. The diameters of the mounting holes are 7/16"...

View full product details

 

5094

Sold Out

Designed to accept a loop of strand, a strand grip, or a Strand Dead-end in down guy applications. Recessed bolt hole to accept head of...

View full product details
 

5095

Sold Out

Used in conjunction with Anchor Rods for Helical Anchors. Eye Nuts are forged from High Strength 1045 Steel. Tapped 1.021"-8 UNS-2B. Hot dip galvanized to...

View full product details
 

5096

Sold Out

Used in pairs as a means of aligning and supporting crossarMs.Hole centers are 1" from brace ends. The diameters of the mounting holes are 7/16"...

View full product details
 

51

Sold Out

For use in soft wood. Does not require a preformed hole in wood. Manufactured from AISI 1008 Steel. Zinc plated to meet ASTM Specification F1941....

View full product details

 

5103

Sold Out

Combination head accepts both Phillip, Slotted and Hex drives. Used to "tap" their own mating internal thread when driven into preformed holes in metallic materials....

View full product details
 

5106

Sold Out

Combination head accepts both Phillip, Slotted and Hex drives. Used to "tap" their own mating internal thread when driven into preformed holes in metallic materials....

View full product details
 

5108

Sold Out

Combination head accepts both Phillip, Slotted and Hex drives. Used to "tap" their own mating internal thread when driven into preformed holes in metallic materials....

View full product details
 

5110

Sold Out

Combination head accepts both Phillip, Slotted and Hex drives. Used to "tap" their own mating internal thread when driven into preformed holes in metallic materials....

View full product details

 

5116

Sold Out

Combination head accepts both Phillip, Slotted and Hex drives. Used to "tap" their own mating internal thread when driven into preformed holes in metallic materials....

View full product details
 

5117

Sold Out

Combination head accepts both Phillip, Slotted and Hex drives. Used to "tap" their own mating internal thread when driven into preformed holes in metallic materials....

View full product details
 

5118

Sold Out

Combination head accepts both Phillip, Slotted and Hex drives. Used to "tap" their own mating internal thread when driven into preformed holes in metallic materials....

View full product details
 

5119

Sold Out

Combination head accepts both Phillip, Slotted and Hex drives. Used to "tap" their own mating internal thread when driven into preformed holes in metallic materials....

View full product details

 

5120

Sold Out

Combination head accepts both Phillip, Slotted and Hex drives. Used to "tap" their own mating internal thread when driven into preformed holes in metallic materials....

View full product details
 

5123

Sold Out

Combination head accepts both Phillip, Slotted and Hex drives. Used to "tap" their own mating internal thread when driven into preformed holes in metallic materials....

View full product details
 

5124

Sold Out

Combination head accepts both Phillip, Slotted and Hex drives. Used to "tap" their own mating internal thread when driven into preformed holes in metallic materials....

View full product details
 

5125

Sold Out

Combination head accepts both Phillip, Slotted and Hex drives. Used to "tap" their own mating internal thread when driven into preformed holes in metallic materials....

View full product details

« Previous 1 … 36 37 38 39 40 … 78 Next »