Products

863

Sold Out $7.97

Used in conjunction with a One-Bolt Guy Clamp for supporting strand on exterior walls where more than 3" of clearance is required between cable and...

864

Sold Out $0.11

Used to seal entry hole and protect cable. Molded from UV (ULtra Violet) resistant polypropylene.

865

Sold Out $0.05

Used to seal entry hole and protect cable. Molded from UV (ULtra Violet) resistant polypropylene.

8650

Sold Out $4.26

Used to assist linemen in climbing poles. A knurled ring is provided to ensure proper driving depth. Fetter thread length is 4-3/4". Hook height is...

8655

Sold Out $1.78

Centering Washers are used with 5/8" diameter shank steel pins on wood crossarms previous drilled with 1-1/2" holes for wood pins. The bottom centering washer...

8657

Sold Out $1.27

Centering Washers are used with 3/4" diameter shank steel pins on wood crossarms previous drilled with 1-5/8" holes for wood pins. The bottom centering washer...

868

Sold Out $1.98

Used for distribution, service bonding, or tap connections. "V" grooves properly align ground wires for maximum engagement. Bolt and washer formed from 304 Stainless Steel...

869

Sold Out $3.39

Used for distribution, service bonding, or tap connections. "V" grooves properly align ground wires for maximum engagement. Bolt and washer formed from 304 Stainless Steel...

87

Sold Out Free

Countersunk head allows fastener to lie flush with surface. Does not require a preformed hole in wood. For use in soft wood. Manufactured from AISI...

870

Sold Out $4.89

Used to attach Pole Line Hardware to telephone poles and other wood structures. Formed from Grade 2 Steel. Lag Screws have a RockWell Hardness ranging...

8700

Sold Out $0.41

Used to mechanically bond ground wire to equipment. One hole on front of connector for attaching ground wire. Accepts ground wire ranging from #14 -...

8701

Sold Out $0.93

Used to mechanically bond ground wire to equipment. One hole on front of connector for attaching ground wire. Accepts ground wire ranging from #14 -...

871

Sold Out $4.46

Used for distribution, service bonding, or tap connections. "V" grooves properly align ground wires for maximum engagement. Bolt and washer formed from 304 Stainless Steel...

872

Sold Out $6.00

Secures cable and wire to buildings with aluminum or steel siding without needing adhesives or fasteners. Designed to hold RG59, RG6, D Station Wire, or...

873

Sold Out $7.00

Secures cable and wire to buildings with aluminum or steel siding without needing adhesives or fasteners. Designed to hold RG59, RG6, D Station Wire, or...

8731

Sold Out Free

874

Sold Out $6.50

Used for distribution, service bonding, or tap connections. "V" grooves properly align ground wires for maximum engagement. Bolt and washer formed from 304 Stainless Steel...

875

Sold Out $2.20

Used as a mechanical connection between sectional ground rods. Coupling is internally full-threaded. Manufactured from high strength bronze. Couplings are UL Listed for direct burial...

876

Sold Out $2.54

Used as a mechanical connection between sectional ground rods. Coupling is internally full-threaded. Manufactured from high strength bronze. Couplings are UL Listed for direct burial...

877

Sold Out $3.01

Used as a mechanical connection between sectional ground rods. Coupling is internally full-threaded. Manufactured from high strength bronze. Couplings are UL Listed for direct burial...

878

Sold Out $2.75

Used to provide a permanent connection between two ground wires. "V" grooves properly align ground wires for maximum engagement. Electrolytic spacer bar provides three additional...

879

Sold Out $5.72

Provides a mechanical means for bonding various sizes of copper ground wire. Manufactured from high strength Bronze alloy. The H1 connector bonds a #6-10 AWG...

880

Sold Out $10.00

Provides a mechanical means for bonding various sizes of copper ground wire. Manufactured from high strength Bronze alloy. The H2 connector bonds a #4-12 AWG...

880-JK

Sold Out $12.64

Provides a mechanical means for bonding various sizes of copper ground wire. Manufactured from high strength Bronze alloy. The H2 connector bonds a #4-12 AWG...

881

Sold Out $5.92

Used to support strand on interior walls of either frame or masonry construction. The S Wall Bracket provides a 2" standoff from wall. Each bracket...

88109

Sold Out $17.00

Used for boring holes through studs within wall cavities and then "snaking" wire from either direction. Used with rotation only machines equipped with a three...

882

Sold Out $11.81

Used to support strand on interior walls of either frame or masonry construction. The L Wall Bracket provides a 5" standoff from wall. Each bracket...

883

Sold Out $5.69

Used with a porcelain knob to run telephone service wire around corners of buildings. The L Corner Bracket is used at corners where a leader...

884

Sold Out $3.96

Used with a porcelain knob to run telephone service wire around corners of buildings. The L Corner Bracket is used at corners where a leader...

885

Sold Out $0.40

A heavy duty means of securing down guys and wire rope. Comprised of a Malleable Iron base, “U” bolt, and two hex nuts. All components...

886

Sold Out $0.45

A heavy duty means of securing down guys and wire rope. Comprised of a Malleable Iron base, “U” bolt, and two hex nuts. All components...

887

Sold Out $0.82

A heavy duty means of securing down guys and wire rope. Comprised of a Malleable Iron base, “U” bolt, and two hex nuts. All components...

888

Sold Out $1.74

A heavy duty means of securing down guys and wire rope. Comprised of a Malleable Iron base, “U” bolt, and two hex nuts. All components...

88990

Sold Out $27.00

Used for boring holes through studs within wall cavities and then "snaking" wire from either direction. Used with rotation only machines equipped with a three...

890

Sold Out $2.62

Designed for use in square holes to keep the bolt from turning as the nut is tightened. Once bolt is inserted in square hole, bolt...

8900

Sold Out Free

8902G

Sold Out Free

Grade 2 Bolts conform to ASTM A307. Bolts are hot dip galvanized to meet ASTM Specification F2329. Bolts conform to the dimensions of ASME B18.2.1.Minimum...

8903

Sold Out Free

Grade 2 bolts conform to ASTM A307 Grade A. Grade 2 bolts are zinc plated to meet ASTM Specification F1941. Bolts conform to the dimensions...

890334G

Sold Out Free

Grade 2 Bolts conform to ASTM A307. Bolts are hot dip galvanized to meet ASTM Specification F2329. Bolts conform to the dimensions of ASME B18.2.1.Minimum...

8903G

Sold Out Free

Grade 2 Bolts conform to ASTM A307. Bolts are hot dip galvanized to meet ASTM Specification F2329. Bolts conform to the dimensions of ASME B18.2.1.Minimum...

891

Sold Out $0.19

InsULated joint prevents power from traveling down the house. Accommodates #14 Tapping Screws or 1/4" diameter Concrete Screws. MoULded for high strength, weather resistance, and...

89100

Sold Out $50.10

Used for boring holes through studs within wall cavities and then "snaking" wire from either direction. Used with rotation only machines equipped with a three...

89101

Sold Out $32.33

Used for boring holes through studs within wall cavities and then "snaking" wire from either direction. Used with rotation only machines equipped with a three...

89102

Sold Out $57.54

Used for boring holes through studs within wall cavities and then "snaking" wire from either direction. Used with rotation only machines equipped with a three...

89103

Sold Out $43.82

Used for boring holes through studs within wall cavities and then "snaking" wire from either direction. Used with rotation only machines equipped with a three...

89104

Sold Out $54.00

Used for boring holes through studs within wall cavities and then "snaking" wire from either direction. Used with rotation only machines equipped with a three...

89105

Sold Out $20.00

Used for boring holes through studs within wall cavities and then "snaking" wire from either direction. Used with rotation only machines equipped with a three...

89106

Sold Out $64.72

Used for boring holes through studs within wall cavities and then "snaking" wire from either direction. Used with rotation only machines equipped with a three...